# lm_sensors configuration file for the Supermicro PDSMi+ motherboard
# 2008-05-06, Jean Delvare <khali@linux-fr.org>
# Comments welcome!

chip "w83793-*"

### Voltages

   label  in0   "Vcore"
   label  in1   "+1.5V"
   label  in2   "Vtt"
   label  in3   "-12V"
   label  in4   "Vdimm"
   label  in5   "+3.3V"
   label  in6   "+12V"
   label  in7   "+5V"
   label  in8   "5VSB"
   label  in9   "Vbat"

   compute in3 (@ * 5.14) - 14.91, (@ + 14.91) / 5.14
   compute in6  @ * 12,             @ / 12

   # All voltage limits are already set properly, except for in0 and in1
   set in0_min   1.2 * 0.90
   set in0_max   1.2 * 1.10
   set in1_min   1.5 * 0.90
   set in1_max   1.5 * 1.10

### Fans

   # The board has 6 fan headers.
   label  fan1  "Fan1"
   label  fan2  "Fan2"
   label  fan3  "Fan3"
   label  fan4  "Fan4"
   label  fan5  "Fan5"
   ignore fan6
   label  fan7  "Fan6"
   ignore fan8
   ignore fan9
   ignore fan10

   # When installed in a 1U rack, only two fans are connected.
   ignore fan3
   ignore fan4
   ignore fan5
   ignore fan7

   set fan3_min   0
   set fan4_min   0
   set fan5_min   0
   set fan6_min   0
   set fan7_min   0
   set fan8_min   0
   set fan9_min   0
   set fan10_min  0

   # Fan speed limits are set to 712 RPM by default, which is way too
   # low to be useful.
   set fan1_min   4000
   set fan2_min   4000

### Temperatures

   label  temp1  "CPU Temp"
   ignore temp2
   ignore temp3
   ignore temp4
   label  temp5  "Aux Temp"
   label  temp6  "Sys Temp" # Appeared with a BIOS update

   # Override CPU temperature threshold
   set temp1_max       80
   set temp1_max_hyst  70

   set temp6_max       60
   set temp6_max_hyst  55