# lm_sensors configuration file for the Epox 9NPA3J motherboard
# 2006-10-08, Jean Delvare <khali@linux-fr.org>
# Comments welcome!

chip "f71872f-*"

### Voltages

   # in4 and in8 are not available.
   label in0  "+3.3V"
   label in1  "+5V"
   label in2  "Vdimm"
   label in3  "5VSB"
   label in5  "+12V"
   label in6  "Vcc1.5V"
   label in7  "Vcore"
   label in9  "3VSB"
   label in10 "Vbat"

   # in0, in9 and in10 are scaled internally
   compute in1  @*(1+200/47),  @/(1+200/47)
   compute in2  @*(1+100/100), @/(1+100/100)
   compute in3  @*(1+200/47),  @/(1+200/47)
   compute in5  @*(1+200/20),  @/(1+200/20)

   # in0 is the chip's own VCC.
   set in0_min   3.0
   set in0_max   3.6

   set in1_min   5.0  * 0.95
   set in1_max   5.0  * 1.05
   set in2_min   2.5  * 0.95
   set in2_max   2.6  * 1.05
   set in3_min   5.0  * 0.95
   set in3_max   5.0  * 1.05
   set in5_min  12.0  * 0.95
   set in5_max  12.0  * 1.05
   set in6_min   1.5  * 0.95
   set in6_max   1.5  * 1.05
   # in7 nominal value depends on the CPU model
   set in7_min   1.15 * 0.95
   set in7_max   1.4  * 1.05
   set in9_min   3.0
   set in9_max   3.6
   set in10_min  2.7
   set in10_max  3.3

### Fans

   label fan1 "CPU Fan"
   label fan2 "PSU Fan"
   label fan3 "Case Fan"

   set fan1_min 1000
   #set fan2_min 1400
   #set fan3_min 1400

### Temperatures

   label  temp1 "CPU Temp"
   label  temp2 "Sys Temp"
   ignore temp3

   set temp1_max   70
   set temp1_hyst  66
   set temp2_max   50
   set temp2_hyst  47